Future Possibilities for the SPEAR3 Lattice
- SLAC
This paper describes the modifications that can be made to the SPEAR3 baseline lattice in order to optimize the match of the electron optics for future insertion devices. The latter include an in-vacuum undulator and other devices specially tailored for hard x-ray sources. The common requirement of these sources is a small vertical electron beam size at the insertion devices that will allow the use of small gap undulators. Thus, the goal of this study is to show the feasibility of installing in SPEAR3 a lattice with vertical beta-functions at the insertion devices straight sections that are smaller than the one provided by the baseline lattice. This modification has repercussions on the hardware configuration, the dynamic aperture and the lifetime.
- Research Organization:
- Stanford Linear Accelerator Center, Menlo Park, CA (US)
- Sponsoring Organization:
- USDOE Office of Science (US)
- DOE Contract Number:
- AC03-76SF00515
- OSTI ID:
- 826859
- Report Number(s):
- SLAC-PUB-10400
- Country of Publication:
- United States
- Language:
- English
Similar Records
ADDITIONAL QUADRUPOLES AT CENTER OF LONG STRAIGHTS IN THE NSLS-II LATTICE
Effect of Insertion Devices in SPEAR3
LOW HORIZONTAL BETA FUNCTION IN LONG STRAIGHTS OF THE NSLS-II LATTICE
Conference
·
Mon Mar 28 00:00:00 EDT 2011
·
OSTI ID:1016640
Effect of Insertion Devices in SPEAR3
Technical Report
·
Thu Aug 19 00:00:00 EDT 1999
·
OSTI ID:10521
LOW HORIZONTAL BETA FUNCTION IN LONG STRAIGHTS OF THE NSLS-II LATTICE
Conference
·
Mon Mar 28 00:00:00 EDT 2011
·
OSTI ID:1016641