Eddy current and quench loads and stress of SSC collider 4-K liner and the bore tube during magnet quench
This paper describes the response of the eddy current and quench loads on a proposed Superconducting SuperCollider 4-K liner system. The liner within a bore tube is designed to remove the radiated power and the photodesorbed gas that impair the beam tube vacuum. The bimetallic liner tube is subjected to cooldown and eddy current loads. The square liner tube is a two-shell laminated Nitronic-40 steel is used for strength and a copper inner layer for low impedance to the image currents. Perforated holes are used to remove the photodesorbed gases for vacuum maintenance. The holes are located in a low-stress area of the liner. Rectangular holes in a four-pole symmetry pattern are required for beam dynamic stability. The liner is conductivity cooled by the round steel bore tube with a 2-mm wall. The copper layer must not be stressed over the yield strength limit because copper properties such as conductivity are known to change when the copper is stressed over yield strength. This analysis will address liner system response under thermal, eddy current, and vaporized liquid helium loads in a quenching dipole magnet.
- Research Organization:
- Superconducting Super Collider Lab., Dallas, TX (United States)
- Sponsoring Organization:
- USDOE, Washington, DC (United States)
- DOE Contract Number:
- AC35-89ER40486
- OSTI ID:
- 82451
- Report Number(s):
- SSCL-Preprint-462; CONF-930703-47; ON: DE95011134; TRN: 95:017120
- Resource Relation:
- Conference: International cryogenic materials conference (ICMC), Albuquerque, NM (United States), 12-16 Jul 1993; Other Information: PBD: Jul 1993
- Country of Publication:
- United States
- Language:
- English
Similar Records
Effective stress of the SSC 80-K synchrotron radiation liner in a quenching dipole magnet
Effective stress of the SSC 80-K synchrotron radiation liner in a quenching dipole magnet