Three-dimensional spray distributions in a direct injection diesel engine
- Univ. of Hiroshima (Japan)
Experiments and modeling of a spray impinged onto a cavity wall of a simulated piston were performed under simulated diesel engine conditons (pressure and density) at an ambient temperature. The diesel fuel was delivered from a Bosch-type injection pump to a single-hole nozzle, the hole being drilled in the same direction as the original five-hole nozzle. The fuel was injected into a high-pressure bomb in which an engine combustion chamber, composed of a piston, a cylinder head and a cylinder liner, was installed. Distributions of the spray impinging on the simulated combustion chamber were observed from various directions while changing some of the experimental parameters, such as combustion chamber shape, nozzle projection and top-clearance. High-speed photography was used in the constant volume bomb to examine the effect of these parameters on the spray distributions. The spray distributions obtained in the simulated combustion chamber are compared to the distributions calculated by a spray model based on a multi-package, spray model 3 refs., 13 figs., 1 tab.
- Sponsoring Organization:
- USDOE
- OSTI ID:
- 81375
- Report Number(s):
- CONF-9409289--
- Journal Information:
- SAE Special Publication, Journal Name: SAE Special Publication Journal Issue: 1050; ISSN SAESA2
- Country of Publication:
- United States
- Language:
- English
Similar Records
Direct injection type diesel engine
Gaseous simulation of diesel-type sprays in a motored engine