HIGH RESOLUTION ANALOG / DIGITAL POWER SUPPLY CONTROLLER
- SLAC
Corrector magnets for the SPEAR-3 synchrotron radiation source require precision, high-speed control for use with beam-based orbit feedback. A new Controller Analog/Digital Interface card (CANDI) has been developed for these purposes. The CANDI has a 24-bit DAC for current control and three 24-bit {Delta}-{Sigma} ADCs to monitor current and voltages. The ADCs can be read and the DAC updated at the 4 kHz rate needed for feedback control. A precision 16-bit DAC provides on-board calibration. Programmable multiplexers control internal signal routing for calibration, testing, and measurement. Feedback can be closed internally on current setpoint, externally on supply current, or beam position. Prototype and production tests are reported in this paper. Noise is better than 17 effective bits in a 10 mHz to 2 kHz bandwidth. Linearity and temperature stability are excellent.
- Research Organization:
- Stanford Linear Accelerator Center, Menlo Park, CA (US)
- Sponsoring Organization:
- USDOE Office of Science (US)
- DOE Contract Number:
- AC03-76SF00515
- OSTI ID:
- 813102
- Report Number(s):
- SLAC-PUB-9806
- Country of Publication:
- United States
- Language:
- English
Similar Records
Closed orbit feedback with digital signal processing
Versatile CAMAC power supply controller-monitor with built-in ramping and ripple monitor
LAB4D: A low power, multi-GSa/s, transient digitizer with sampling timebase trimming capabilities
Technical Report
·
Mon Aug 01 00:00:00 EDT 1994
·
OSTI ID:10171970
Versatile CAMAC power supply controller-monitor with built-in ramping and ripple monitor
Conference
·
Mon Oct 01 00:00:00 EDT 1984
·
OSTI ID:6135380
LAB4D: A low power, multi-GSa/s, transient digitizer with sampling timebase trimming capabilities
Journal Article
·
Tue Feb 05 19:00:00 EST 2019
· Nuclear Instruments and Methods in Physics Research. Section A, Accelerators, Spectrometers, Detectors and Associated Equipment
·
OSTI ID:1597752