Skip to main content
U.S. Department of Energy
Office of Scientific and Technical Information

6D Phase Space Measurements at the SLAC Gun Test Facility

Technical Report ·
DOI:https://doi.org/10.2172/812967· OSTI ID:812967

Proposed fourth generation light sources using SASE FELs to generate short pulse, coherent X-rays require demonstration of high brightness electron sources. The Gun Test Facility (GTF) at SLAC was built to test high brightness sources for the proposed Linac Coherent Light Source at SLAC. The GTF is composed of an Sband photocathode rf gun with a Cu cathode, emittance compensating solenoid, single 3 m SLAC linac section and e-beam diagnostic section with a UV drive laser system. The longitudinal emittance exiting the gun has been determined by measuring the energy spectrum downstream of the linac as a function of the linac phase. The e-beam pulse width, correlated and uncorrelated energy spread at the linac entrance have been fit to the measured energy spectra using a least square error fitting routine. The fit yields a pulse width of 2.9 ps FWHM for a 4.3 ps FWHM laser pulse width and 2% rms correlated energy spread with 0.07% rms uncorrelated energy spread. The correlated energy spread is enhanced in the linac to allow slice emittance measurements by conducting a quadrupole scan in a dispersive section. The normalized slice emittance has been measured to be as low as 2 mm-mrad for beams with peak currents up to 150 A (300 pC with a laser pulse length of 1.8 ps) while the full projected emittance is 3 mm-mrad.

Research Organization:
Stanford Linear Accelerator Center, Menlo Park, CA (US)
Sponsoring Organization:
USDOE Office of Science (US)
DOE Contract Number:
AC03-76SF00515
OSTI ID:
812967
Report Number(s):
SLAC-PUB-9681
Country of Publication:
United States
Language:
English