Creep Resistant Zinc Alloy
This report covers the development of Hot Chamber Die Castable Zinc Alloys with High Creep Strengths. This project commenced in 2000, with the primary objective of developing a hot chamber zinc die-casting alloy, capable of satisfactory service at 140 C. The core objectives of the development program were to: (1) fill in missing alloy data areas and develop a more complete empirical model of the influence of alloy composition on creep strength and other selected properties, and (2) based on the results from this model, examine promising alloy composition areas, for further development and for meeting the property combination targets, with the view to designing an optimized alloy composition. The target properties identified by ILZRO for an improved creep resistant zinc die-casting alloy were identified as follows: (1) temperature capability of 1470 C; (2) creep stress of 31 MPa (4500 psi); (3) exposure time of 1000 hours; and (4) maximum creep elongation under these conditions of 1%. The project was broadly divided into three tasks: (1) Task 1--General and Modeling, covering Experimental design of a first batch of alloys, alloy preparation and characterization. (2) Task 2--Refinement and Optimization, covering Experimental design of a second batch of alloys. (3) Task 3--Creep Testing and Technology transfer, covering the finalization of testing and the transfer of technology to the Zinc industry should have at least one improved alloy result from this work.
- Research Organization:
- International Lead Zinc Research Organization (US)
- Sponsoring Organization:
- (US)
- DOE Contract Number:
- FC07-99ID13846
- OSTI ID:
- 809087
- Report Number(s):
- DOE/ID/13846-2; ZCA-9; TRN: US200307%%265
- Resource Relation:
- Other Information: PBD: 31 Dec 2002
- Country of Publication:
- United States
- Language:
- English
Similar Records
Modeling and Optimization of Direct Chill Casting to Reduce Ingot Cracking
Applications of composite gas-turbine components. Final report. Phase I