PLC/DTAM Software Programs for Pumping Instrumentation & Control Skid U

Technical Report · Wed Aug 01 00:00:00 EDT 2001

DOI:https://doi.org/10.2172/807273· OSTI ID:807273

HORNER, T M ^[1]

---

1. CHG

This document describes the software programs for the Allen-Bradley SLC 500 programmable logic controller (PLC) and the Allen-Bradley DTAM PLUS operator interface module used on Pumping Instrumentation and Control (PIC) skid ''U''. The software programs for the SLC 500 and DTAM Plus are based on the core programs provided by Allen-Bradley. The PLC and DTAM software programs on skid ''D'' for SX-104 are the baseline programs. These baselines will be tailored for each individual BY-farm skid. An Acceptance Test Procedure (ATP) and an Operational Test Procedure (OTP) verify that the software programs meet the specific requirements for BY-106 pumping. This document represents the final PLC and DTAM programs for PIC skid ''U'' at BY-106. These programs were printed out after the performance of the OTP. The OTP acts as the final qualification test for the software programs. Functional requirements and details of the PLC ladder logic are described in this document. The final programs entered into the PLC and DTAM Plus are included as Appendices to this document.

• Research Organization: CHG (US)
• Sponsoring Organization: USDOE Office of Environmental Management (EM) (US)
• DOE Contract Number: AC27-99RL14047
• OSTI ID: 807273
• Report Number(s): RPP-6710, Rev.0; EDT-631466
• Country of Publication: United States
• Language: English

Related Subjects

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE WASTES FROM NUCLEAR FACILITIES
99 GENERAL AND MISCELLANEOUS
COMPUTER CODES
COMPUTERIZED CONTROL SYSTEMS
DOCUMENTATION
DTAM
INTERIM STABILIZATION
LADDER LOGIC
MEASURING INSTRUMENTS
PICS
PLC
PUMPS
RADIOACTIVE WASTE STORAGE
SALT WELL
SKID
STORAGE FACILITIES