skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: AZ-101 Mixer Pump Test Qualification Test Procedures (QTP)

Abstract

Describes the Qualification test procedure for the AZ-101 Mixer Pump Data Acquisition System (DAS). The purpose of this Qualification Test Procedure (QTP) is to confirm that the AZ-101 Mixer Pump System has been properly programmed and hardware configured correctly. This QTP will test the software setpoints for the alarms and also check the wiring configuration from the SIMcart to the HMI. An Acceptance Test Procedure (ATP), similar to this QTP will be performed to test field devices and connections from the field.

Authors:
Publication Date:
Research Org.:
FFS (US)
Sponsoring Org.:
ENVIRONMENTAL MANAGEMENT (US)
OSTI Identifier:
801140
Report Number(s):
RPP-5571, Rev.0
EDT-627521; TRN: US0300100
DOE Contract Number:  
AC27-99RL14047
Resource Type:
Technical Report
Resource Relation:
Other Information: PBD: 10 Jan 2000
Country of Publication:
United States
Language:
English
Subject:
12 MANAGEMENT OF RADIOACTIVE WASTES, AND NON-RADIOACTIVE WASTES FROM NUCLEAR FACILITIES; STORAGE FACILITIES; RADIOACTIVE WASTE STORAGE; DATA ACQUISITION SYSTEMS; MIXERS; PUMPS; PERFORMANCE TESTING; COMPUTERIZED CONTROL SYSTEMS

Citation Formats

THOMAS, W.K. AZ-101 Mixer Pump Test Qualification Test Procedures (QTP). United States: N. p., 2000. Web. doi:10.2172/801140.
THOMAS, W.K. AZ-101 Mixer Pump Test Qualification Test Procedures (QTP). United States. doi:10.2172/801140.
THOMAS, W.K. Mon . "AZ-101 Mixer Pump Test Qualification Test Procedures (QTP)". United States. doi:10.2172/801140. https://www.osti.gov/servlets/purl/801140.
@article{osti_801140,
title = {AZ-101 Mixer Pump Test Qualification Test Procedures (QTP)},
author = {THOMAS, W.K.},
abstractNote = {Describes the Qualification test procedure for the AZ-101 Mixer Pump Data Acquisition System (DAS). The purpose of this Qualification Test Procedure (QTP) is to confirm that the AZ-101 Mixer Pump System has been properly programmed and hardware configured correctly. This QTP will test the software setpoints for the alarms and also check the wiring configuration from the SIMcart to the HMI. An Acceptance Test Procedure (ATP), similar to this QTP will be performed to test field devices and connections from the field.},
doi = {10.2172/801140},
journal = {},
number = ,
volume = ,
place = {United States},
year = {2000},
month = {1}
}