An IGBT Driven Slotted Beam Pipe Kicker for SPEAR III Injection
- SLAC
The SPEAR III injection kicker system is composed of three kicker magnets, K1, K2, and K3. These magnets, along with the power modulators to drive them constitute an injection system which will be used to deflect an incoming electron beam with an energy of 3.3 GeV by an angle of 2.5 mrad for K1 and K3, and 1 mrad for K2. The pulse shape of the magnetic field in the three magnets must be matched in order to preserve a closed orbit. The pulse duration is required to be less than 780 ns, with rise and fall times of less than 375 ns, and a pulse repetition frequency of 10 Hz. The aperture of all three magnets is 60 x 34 mm in an 8 inch vacuum vessel. The magnetic length is 1.2 m for K1 and K3, and 0.6 m for K2 [1]. The magnet design employs a slotted beam pipe which is shorted at one end. A solid state IGBT based, induction type of modulator drives the magnets. Modulators for K1 and K3 consist of eight 4.5 kV, 600 A IGBTs, and eight Finemet magnet cores with four 22.5 Ohm output cables to drive 2381 A into the magnets. The modulator for K2 uses four IGBTs and cores, and 8 output cables to produce a 2619 A pulse. Cables of length greater than one half the pulse width must be used in order to avoid reflections from the shorted magnet. The design charge voltage for the modulators is 20 kV for K1 and K3. This paper describes the magnet and modulator design, as and presents test data from a prototype system.
- Research Organization:
- Stanford Linear Accelerator Center, Menlo Park, CA (US)
- Sponsoring Organization:
- USDOE Office of Energy Research (ER) (US)
- DOE Contract Number:
- AC03-76SF00515
- OSTI ID:
- 800073
- Report Number(s):
- SLAC-PUB-9455
- Country of Publication:
- United States
- Language:
- English
Similar Records
SPEAR 3 INJECTION KICKER
Fast kicker requirements for the SSC's low and medium energy boosters [Book Chapter]
Research and development of RHIC injection kicker upgrade with nano second FID pulse generator
Technical Report
·
Tue Aug 20 00:00:00 EDT 2002
·
OSTI ID:800040
Fast kicker requirements for the SSC's low and medium energy boosters [Book Chapter]
Conference
·
Tue Aug 06 00:00:00 EDT 2002
· Conference Record of the 1991 IEEE Particle Accelerator Conference
·
OSTI ID:5549836
Research and development of RHIC injection kicker upgrade with nano second FID pulse generator
Conference
·
Sun May 20 00:00:00 EDT 2012
·
OSTI ID:1046988