Fireside corrosion of alloys for combustion power plants.

Conference · Tue Jun 11 04:00:00 EDT 2002

OSTI ID:797898

Natesan, K; Purohit, A; Rink, D L

A program on fireside corrosion is being conducted at Argonne National Laboratory to evaluate the performance of several structural alloys in the presence of mixtures of synthetic coal ash, alkali sulfates, and alkali chlorides. Candidate alloys are also exposed in a small-scale coal-fired combustor at the National Energy Technology Laboratory in Pittsburgh. Experiments in the present program, which addresses the effects of deposit chemistry, temperature, and alloy chemistry on the corrosion response of alloys, were conducted at temperatures in the range of 575-800 C for time periods up to {approx}1850 h. Alloys selected for the study included HR3C, 310TaN, HR120, SAVE 25, NF709, modified 800, 347HFG, and HCM12A. In addition, 800H clad with Alloy 671 was included in several of the exposures. Data were obtained on weight change, scale thickness, internal penetration, microstructural characteristics of corrosion products, mechanical integrity, and cracking of scales. Results showed that relationship of corrosion rates to temperature followed a bell-shaped curve, with peak rates at {approx}725 C, but the rate itself was dependent on the alloy chemistry. Several alloys showed acceptable rates in the sulfate-containing coal-ash environment; but NaCl in the deposit led to catastrophic corrosion at 650 and 800 C.

• Research Organization: Argonne National Lab., IL (US)
• Sponsoring Organization: US Department of Energy (US)
• DOE Contract Number: W-31109-ENG-38
• OSTI ID: 797898
• Report Number(s): ANL/ET/CP-107914
• Country of Publication: United States
• Language: English

Related Subjects

01 COAL, LIGNITE, AND PEAT
ALLOYS
CHEMISTRY
CHLORIDES
COAL
COMBUSTION
COMBUSTORS
CORROSION
CORROSION PRODUCTS
HYDROXIDES
MIXTURES
PERFORMANCE
POWER PLANTS
SULFATES
THICKNESS