Analysis of selected specimens from the STS-46 Energetic Oxygen Interaction with Materials-3 experiment
The Energetic Oxygen Interaction with Materials 3 (EOIM-3) experiment was flown on the STS-46 mission, which was launched on 31 July 1992 and returned 8 Aug. 1992. Boeing specimens were located on both the NASA Marshall Space Flight Center (MSFC) tray and the Ballistic Missile Defense Organization (BMDO) tray integrated by the Jet Propulsion Laboratory (JPL). The EOIM-3 pallet was mounted in the Space Shuttle payload bay near the aft bulkhead. During the mission, the atomic oxygen (AO) exposure levels of specimens in these passive sample trays was about 2.3 x 10(exp 20) atoms/sq cm. The specimens also received an estimated 22 equivalent sun hours of solar exposure. In addition, it appears that the EOIM-3 pallet was exposed to a silicone contamination source and many specimens had a thin layer of silicon based deposit on their surfaces after the flight. The specimens on the MSFC tray included seven solid film lubricants, a selection of butyl rubber (B612) and silicone (S383) o-rings, three indirect scatter surfaces, and Silver/Fluorinated Ethylene Propylene (Ag/FEP) and Chemglaze A276 specimens which had previously flown on trailing edge locations of the Long Duration Exposure Facility (LDEF). The specimens on the JPL tray included composites previously flown on LDEF and two indirect scattering surfaces.
- Research Organization:
- National Aeronautics and Space Administration, Hampton, VA (United States). Langley Research Center
- OSTI ID:
- 79524
- Report Number(s):
- N--95-27629; NASA-CP--3275-PT-3; L--17430C-PT-3; NAS--1.55:3275-PT-3; CONF-9311137--
- Country of Publication:
- United States
- Language:
- English
Similar Records
Exposure of LDEF materials to atomic oxygen: Results of EOIM 3
Thermal control materials on EOIM-3