EXCESS RF POWER REQUIRED FOR RF CONTROL OF THE SPALLATION NEUTRON SOURCE (SNS) LINAC, A PULSED HIGH-INTENSITY SUPERCONDUCTING PROTON ACCELERATOR
A high-intensity proton linac, such as that being planned for the SNS, requires accurate RF control of cavity fields for the entire pulse in order to avoid beam spill. The current design requirement for the SNS is RF field stability within {+-}0.5% and {+-}0.5{sup o} [1]. This RF control capability is achieved by the control electronics using the excess RF power to correct disturbances. To minimize the initial capital costs, the RF system is designed with 'just enough' RF power. All the usual disturbances exist, such as beam noise, klystron/HVPS noise, coupler imperfections, transport losses, turn-on and turn-off transients, etc. As a superconducting linac, there are added disturbances of large magnitude, including Lorentz detuning and microphonics. The effects of these disturbances and the power required to correct them are estimated, and the result shows that the highest power systems in the SNS have just enough margin, with little or no excess margin.
- Research Organization:
- Los Alamos National Laboratory (LANL), Los Alamos, NM (United States)
- Sponsoring Organization:
- US Department of Energy (US)
- DOE Contract Number:
- W-7405-ENG-36
- OSTI ID:
- 783156
- Report Number(s):
- LA-UR-01-3046; TRN: US0108476
- Resource Relation:
- Journal Volume: 1; Conference: Conference title not supplied, Conference location not supplied, Conference dates not supplied; Other Information: PBD: 1 Jun 2001
- Country of Publication:
- United States
- Language:
- English
Similar Records
Low-power RF tuning of the Spallation Neutron Source warm LINAC structures
RF AND THERMO-MECHANICAL CONSIDERATIONS IN DESIGNING THE WAVEGUIDE IRIS COUPLER FOR THE DRIFT TUBE LINAC IN THE ORNL SPALLATION NEUTRON SOURCE