Protecting LHC components against radiation resulting from colliding beam interactions
Conference
·
OSTI ID:781996
Beam-induced energy deposition in the LHC high luminosity interaction region (IR) components due to both pp collisions and beam loss in the IR vicinity is a significant challenge for the design of the high luminosity insertions. It was shown in our previous studies that a set of collimators in the machine and absorbers within the low-beta quadrupoles would reduce both the peak power density and total heat load to tolerable levels with a reasonable safety margin. In this paper the results of further optimization and comprehensive MARS calculations are briefly described for the updated IP1 and IP5 layouts and a baseline pp-collision source term. Power density, power dissipation, accumulated dose and residual dose rates are studied in the components of the inner triplets including their TAS absorbers, the TAN neutral beam absorbers, separation dipoles, and quadrupoles of the outer triplets and possible collimators there. It is shown that the optimized absorbers and collimators provide adequate protection of all the critical components.
- Research Organization:
- Fermi National Accelerator Lab., Batavia, IL (US)
- Sponsoring Organization:
- USDOE Office of Energy Research (ER) (US)
- DOE Contract Number:
- AC02-76CH03000
- OSTI ID:
- 781996
- Report Number(s):
- FERMILAB-Conf-01/131
- Country of Publication:
- United States
- Language:
- English
Similar Records
Mitigation of effects of beam-induced energy deposition in the LHC high-luminosity interaction regions
Absorbers for the high luminosity insertions of the LHC
The Luminosity Monitoring System for the LHC: Modeling and Test Results
Conference
·
Wed May 28 00:00:00 EDT 2003
·
OSTI ID:811232
Absorbers for the high luminosity insertions of the LHC
Conference
·
Mon Jun 01 00:00:00 EDT 1998
·
OSTI ID:666052
The Luminosity Monitoring System for the LHC: Modeling and Test Results
Conference
·
Sun Oct 25 00:00:00 EDT 2009
·
OSTI ID:979920