Skip to main content
U.S. Department of Energy
Office of Scientific and Technical Information

Managing lead-based paint abatement wastes

Conference ·
OSTI ID:78074
Renovation, remodeling, demolition, and surface preparation for painting, in addition to specified lead abatement, are all activities that have the potential to produce hazardous wastes if a property was painted with lead-based paint. Lead-based paint was used on residential structures until 1978, when most residential uses were banned by the Consumer Products Safety Council. Prior to the 1950s, paints for residential uses may have contained up to 50% lead by weight. Today, commercial and military paints may still contain lead and can be used on non-residential structures. The lead content of residential paints is limited to 0.06% lead (by weight) in the dried film. This paper provides an overview of some of the information needed to properly manage lead-based paint abatement wastes. The issues covered in this paper include waste classification, generator status, treatment, and land disposal restrictions. The author assumes that the reader is familiar with the provision of the Health and Safety Code and the California Code of Regulations that pertain to generation and management of hazardous wastes. Citations provided herein do not constitute an exhaustive list of all the regulations with which a generator of hazardous waste must comply.
OSTI ID:
78074
Report Number(s):
CONF-9404125--
Country of Publication:
United States
Language:
English

Similar Records

Lead-based paint assessment
Conference · Fri Dec 30 23:00:00 EST 1994 · OSTI ID:78009

A blasting additive that renders wastes non hazardous in lead paint abatement projects
Conference · Fri Dec 30 23:00:00 EST 1994 · OSTI ID:70078

Lead abatement training for supervisors and contractors. Instructors guide
Miscellaneous · Thu Dec 31 23:00:00 EST 1998 · OSTI ID:6210651