Skip to main content
U.S. Department of Energy
Office of Scientific and Technical Information

Calibration-free electrical conductivity measurements for highly conductive slags

Journal Article · · Metallurgical Transactions B
OSTI ID:755584

This research involves the measurement of the electrical conductivity (K) for the ESR (electroslag remelting) slag (60 wt.% CaF{sub 2} - 20 wt.% CaO - 20 wt.% Al{sub 2}O{sub 3}) used in the decontamination of radioactive stainless steel. The electrical conductivity is measured with an improved high-accuracy-height-differential technique that requires no calibration. This method consists of making continuous AC impedance measurements over several successive depth increments of the coaxial cylindrical electrodes in the ESR slag. The electrical conductivity is then calculated from the slope of the plot of inverse impedance versus the depth of the electrodes in the slag. The improvements on the existing technique include an increased electrochemical cell geometry and the capability of measuring high precision depth increments and the associated impedances. These improvements allow this technique to be used for measuring the electrical conductivity of highly conductive slags such as the ESR slag. The volatilization rate and the volatile species of the ESR slag measured through thermogravimetric (TG) and mass spectroscopy analysis, respectively, reveal that the ESR slag composition essentially remains the same throughout the electrical conductivity experiments.

Research Organization:
Sandia National Labs., Albuquerque, NM (US); Sandia National Labs., Livermore, CA (US)
Sponsoring Organization:
US Department of Energy (US)
DOE Contract Number:
AC04-94AL85000
OSTI ID:
755584
Report Number(s):
SAND2000-1096J
Journal Information:
Metallurgical Transactions B, Journal Name: Metallurgical Transactions B
Country of Publication:
United States
Language:
English

Similar Records

Electroslag remelting of a uranium alloy
Conference · Thu Jun 12 00:00:00 EDT 1975 · OSTI ID:4165469

Crystallization Characteristics and In-Mold Performance of Electroslag Remelting-Type TiO{sub 2}-Bearing Slag
Journal Article · Sat Jun 15 00:00:00 EDT 2019 · Metallurgical and Materials Transactions. B, Process Metallurgy and Materials Processing Science · OSTI ID:22933714

Electroslag Remelting (ESR) Slags for Removal of Radioactive Oxide Contaminants from Stainless Steel, Annual Report (1998-1999)
Technical Report · Sun Aug 01 00:00:00 EDT 1999 · OSTI ID:12659