Study of the react and wind technique for a Nb(3)Sn common coil dipole
Technical Report
·
· IEEE Trans.Appl.Supercond.
- Fermilab; Fermilab
- Fermilab
- LBL, Berkeley
Fermilab, in collaboration with LBNL, is exploring the use of the react and wind technique for a common coil dipole with a Nb/sub 3/Sn Rutherford cable. An R&D; program on conductor design and magnet technology was begun aiming at an 11 T, 2 layer, 30 mm aperture design operating at 4.5 K. The goal is to explore the feasibility of the react and wind technique for flat coils with a minimum beading radius of 90 mm. In order to improve the understanding of the I/sub c/ degradation caused by bending after reaction this effect will be studied on both strands and cables. In this paper we present two techniques to measure the critical current degradation due to bending, both in wires and tables, using standard test facilities. Together with the description of the program we show the results of the first measurements on strands and the layout of the cables that are being produced.
- Research Organization:
- Fermi National Accelerator Laboratory (FNAL), Batavia, IL (United States); Lawrence Berkeley National Laboratory (LBNL), Berkeley, CA (United States)
- Sponsoring Organization:
- USDOE Office of Science (SC), High Energy Physics (HEP) (SC-25)
- DOE Contract Number:
- AC02-07CH11359
- OSTI ID:
- 750397
- Report Number(s):
- FERMILAB-CONF-99-370; FERMILAB-VLHCPUB-220; oai:inspirehep.net:523445
- Country of Publication:
- United States
- Language:
- English
A Nb/sub 3/Sn high field dipole (for SSC)
|
journal | March 1991 |
The strain dependence of the critical properties of Nb3Sn conductors
|
journal | March 1999 |
Nb3Sn dipole magnets
|
journal | January 1979 |
Conceptual design study of high field magnets for very large hadron collider
|
journal | March 2000 |
A common coil design for high field 2-in-1 accelerator magnets
|
conference | January 1998 |
Similar Records
Design and development of Nb{sub 3}Sn single-layer common coil dipole magnet for VLHC
Fabrication and testing of Rutherford-type cables for react and wind accelerator magnets
DESIGN, FABRICATION AND TEST OF THE REACT AND WIND, NB(3)SN, LDX FLOATING COIL CONDUCTOR.
Conference
·
Mon Jul 30 00:00:00 EDT 2001
·
OSTI ID:783677
Fabrication and testing of Rutherford-type cables for react and wind accelerator magnets
Conference
·
Mon Sep 11 00:00:00 EDT 2000
·
OSTI ID:1011736
DESIGN, FABRICATION AND TEST OF THE REACT AND WIND, NB(3)SN, LDX FLOATING COIL CONDUCTOR.
Conference
·
Sun Sep 17 00:00:00 EDT 2000
·
OSTI ID:781377