Novel method of reducing transient emissions from rotary-kiln incinerators through modified waste packaging. Rept. for Mar 90-May 92
The paper gives results of tests on a 73 kW pilot-scale rotary kiln incinerator simulator to examine the effect of modified waste packaging on the ability of the incineration system to respond to transients imposed due to batch charging of volatile liquid surrogate hazardous wastes bound on corncob sorbents. Normally, the waste container ruptures soon after its introduction into the kiln, rapidly releasing any contained volatile materials. This rapid release of combustibles has the potential to locally deplete available oxygen supplied by the main burner. This can lead to a transient puff of unburned material that must be dealt with by downstream equipment, such as an afterburner. Innovative waste packaging methods were used to delay the time required for waste vaporization, which significantly decreased the measured amount of unburned material exiting the kiln. This concept has advantageous implications for rotary kiln incinerators as a way to both reduce transient emissions and increase the feed rate of containerized liquids.
- Research Organization:
- Environmental Protection Agency, Research Triangle Park, NC (United States). Air and Energy Engineering Research Lab.
- OSTI ID:
- 7236782
- Report Number(s):
- PB-92-195932/XAB; EPA-600/A-92/131
- Resource Relation:
- Other Information: Presented at Annual Incineration Conference (11th), Albuquerque, NM., May 12-15, 1992. Prepared in cooperation with Arizona Univ., Tucson. Dept. of Chemical Engineering
- Country of Publication:
- United States
- Language:
- English
Similar Records
Prediction of transient behavior during batch incineration of liquid wastes in rotary kilns
Occurrence of transient puffs in a rotary kiln incinerator simulator. I. Prototype solid plastic wastes