Skip to main content
U.S. Department of Energy
Office of Scientific and Technical Information

Stress-state effects on strength and fracture of partially-stabilized zirconia. Final report, 11 May 1987-10 May 1992

Technical Report ·
OSTI ID:7180754
Stress-state effects on the transformation yield stresses of commercial-grade ceria-partially-stabilized zirconia/alumina (Ce-TZP/Al2O3) composite and MgO-partially-stabilized zirconia (MG-PSZ) were studied in various biaxial tests and in hydraulic compression tests. The yield envelopes in tension-tension and tension-compression stress quadrants and the pressure sensitivity of the yield stress in uniaxial compression were rationalized by a hypothesis where stress-induced transformation is triggered by a critical value of the interaction energy calculated according to the method of Eshelby. Crack-tip transformation zone shapes and sizes and rising crack-growth-resistance behaviors were studied in Ce-TZP/Al2O3. The shape of the crack-tip transformation zones was not consistent with the derived yield criterion; however, the crack shielding developed by the elongated zones could be explained by zone shielding theories that took into account the observed zone shape and the variations in the monoclinic content within the zones. The variation of the R-curves with the sintering temperature was consistent with the effects of transformation zone shape and size on zone shielding. The Ce-TZP/Al2O3 composites were also shown to exhibit a genuine fatigue crack-growth phenomenon.
Research Organization:
Utah Univ., Salt Lake City, UT (United States). Dept. of Materials Science and Engineering
OSTI ID:
7180754
Report Number(s):
AD-A-281742/7/XAB; CNN: DAAL03-87-K-0060
Country of Publication:
United States
Language:
English