Model of the evaporating meniscus in a capillary tube
- Univ. of Denver, CO (United States)
A mathematical model describing the evaporating meniscus in a capillary tube has been formulated incorporating the full three-dimensional Young-Laplace equation, Marangoni convection, London-van der Waals dispersion forces, and nonequilibrium interface conditions. The results showed that varying the dimensionless superheat had no apparent effect on the meniscus profile. However, varying the dispersion number produced a noticeable change in the meniscus profile, but only at the microscopic level near the tube wall. No change in the apparent contact angle was observed with changes in the dimensionless superheat or dispersion number. In all cases, the dimensionless mean curvature was asymptotic to a value equal to that for a hemispherical meniscus. The local interfacial mass flux and total mass transfer rate increased dramatically as the dispersion number was increased, suggesting that surface coatings can play an important role in improving or degrading capillary pumping. The model also predicted that the local capillary pressure remains constant and equal to 2{sigma}/r{sub c} regardless of changes in the dimensionless superheat and dispersion number. It should be noted that the results in this study are theoretical in nature and require experimental verification.
- OSTI ID:
- 7162736
- Journal Information:
- Journal of Heat Transfer (Transactions of the ASME (American Society of Mechanical Engineers), Series C); (United States), Vol. 114:2; ISSN 0022-1481
- Country of Publication:
- United States
- Language:
- English
Similar Records
Apparent dynamic contact angle of an advancing gas--liquid meniscus
Dynamic behavior of a heated meniscus subjected to a transient acceleration field for a small capillary number