Multiaxial graphite test specimen
A multiaxial test program is to be conducted by Oak Ridge National Laboratory (ORNL) on the core component graphite. The objectives of the tests are to obtain failure data under uniaxial and biaxial states of stress in order to construct a failure surface in a two-dimensional stress space. These data will be used in verifying the accuracy of the maximum stress failure theory being proposed for use in designing the core graphite components. Tubular specimens are proposed to be used and are either loaded axially and/or subjected to internal pressure. This report includes a study on three specimen configurations. The conclusions of that study indicate that an elliptical transition geometry procedures the smallest discontinuity effects. Several loading combustions were studied using the elliptical transition specimen. The primary purpose is to establish the location of the highest stress state and its relation to the gage section for all of the loading conditions. The tension/internal pres sure loading condition (1:1) indicated that the high stress area is just outside the gage section but still should be acceptable. 5 refs., 18 figs.
- Research Organization:
- General Atomics Co., San Diego, CA (US)
- Sponsoring Organization:
- US Department of Energy (US)
- DOE Contract Number:
- AC03-88SF17367
- OSTI ID:
- 714688
- Report Number(s):
- DOE/HTGR--88147
- Country of Publication:
- United States
- Language:
- English
Similar Records
Modeling the Multiaxial Strength of H-451 Nuclear Grade Graphite
Establishing multiaxial testing capabilities for tubular and planar specimens