Micromechanics of interfaces in metal matrix composites. Final technical report
The mechanical properties of the interfaces in an Al2O3 fiber reinforced beta-2lS titanium have been evaluated by using fiber pushout tests. The Al2O3 fibers were coated with a refractory metal and Y2O3 which served as a diffusion barrier during the HIPing used to produce the metal matrix composites. By doing fiber pushout tests the interfacial fracture was found to occur at the interface between the refractory metal and the H2O3. The interfacial shear strength and interfacial frictional stress were measured to be 323 and 312 + or - 2 MPa, respectively. The interfacial frictional stress, which is due to asperity interlocking during the fiber sliding, was correlated to the surface roughness of the coated Al2O3 fiber obtained with the aid of an atomic force microscope. The measured surface roughness of 18.8 + or - 2.2 nm was related to the frictional stress through Hutchinson's model. The frictional coefficient between the Al2O3 fiber and the Ti matrix calculated to be 0.32 + or - 0.02.
- Research Organization:
- Minnesota Univ., Minneapolis, MN (United States)
- OSTI ID:
- 7126700
- Report Number(s):
- AD-A-282404/3/XAB; CNN: N00014-92-J-1962
- Country of Publication:
- United States
- Language:
- English
Similar Records
Control of interfacial chemistry and mechanical properties in metal/ceramic composites. Ph.D. Thesis
Evaluation of in situ mechanical properties of composites by using nanoindentation techniques