Surface roughness effects on the hypersonic turbulent boundary layer
An experimental investigation of the response of a hypersonic turbulent boundary layer to a step change in surface roughness has been performed. The boundary layer on a flat nozzle wall of a Mach 6 wind tunnel was subjected to abrupt changes in surface roughness and its adjustment to the new surface conditions was examined. Both mean and fluctuating flow properties were acquired for smooth-to-rough and rough-to-smooth surface configurations. The boundary layer was found to respond gradually and to attain new equilibrium profiles, for both the mean and the fluctuating properties, some 10 to 25 delta downstream of the step change. Mean flow self-similarity was the first to establish itself, followed by the mass flux fluctuations, followed in turn by the total temperature fluctuations. Use of a modified Van Driest transformation resulted in good correlations of smooth and rough wall data in the form of the incompressible law of the wall. This is true even in the nonequilibrium vicinity of the step for small roughness heights. The present data are found to correlate well with previously published roughness effect data from low and high speed flows when the roughnesses are characterized by an equivalent sand grain roughness height.
- Research Organization:
- Sandia Labs., Albuquerque, N.Mex. (USA)
- DOE Contract Number:
- EY-76-C-04-0789
- OSTI ID:
- 7078005
- Report Number(s):
- SAND-77-0587
- Country of Publication:
- United States
- Language:
- English
Similar Records
Studies of the structure of attached and separated regions of viscous/inviscid interaction and the effects of combined surface roughness and blowing in high-Reynolds-number hypersonic flows. Final report, 1 August 1985-1 June 1988
Measurement and calculation of fluid dynamic characteristics of rough-wall turbulent boundary-layer flows