Solvent extraction studies with low-burnup Fast Flux Test Facility fuel in the Solvent Extraction Test Facility
A batch of irradiated Fast Flux Test Facility (FFTF) fuel was processed for the first time in the Solvent Extraction Test Facility (SETF) at the Oak Ridge National Laboratory (ORNL) during Campaign 7. The average burnup of the fuel was only 0.2 atom %, but the cooling time was short enough ({similar_to}2 years) so that {sup 95}Zr was detected in the feed. This short cooling permitted our first measurement of {sup 95}Zr decontamination factors (DFs) without having to use tracers. No operational problems were noted in the operation of the extraction-scrubbing contactor, and low uranium and plutonium losses (< 0.01%) were measured. Fission product DFs were improved noticeably by increasing the number of scrub stages from six to eight. Two flowsheet options for making pure uranium and plutonium products (total partitioning) were tested. Each flowsheet used hydroxylamine nitrate for reducing plutonium. Good products were obtained (uranium DFs of > 10{sup 3} and plutonium DFs of > 10{sup 4}), but each flowsheet was troubled with plutonium reoxidation. Adding hydrazine and lowering the plutonium concentration lessened the problem but did not eliminate it. About 370 g of plutonium was recovered from these tests, purified by anion exchange, converted to PuO{sub 2}, and transferred to the fuel refabrication program. 7 references.
- Research Organization:
- Oak Ridge National Lab., TN (United States)
- Sponsoring Organization:
- USDOE
- DOE Contract Number:
- AC05-84OR21400
- OSTI ID:
- 707341
- Report Number(s):
- ORNL/TM--9189; ON: TI85027064
- Country of Publication:
- United States
- Language:
- English
Similar Records
Solvent extraction studies of coprocessing flowsheets: results from Campaign 5 of the Solvent Extraction Test Facility (SETF)
Solvent extraction studies with high-burnup Fast Flux Test Facility fuel in the Solvent Extraction Test Facility