Skip to main content
U.S. Department of Energy
Office of Scientific and Technical Information

Studies and research concerning BNFP pilot-scale pulsed columns: column profile and holdup studies

Technical Report ·
DOI:https://doi.org/10.2172/706366· OSTI ID:706366
Experimental studies were conducted on pilot-scaled pulsed columns for the purpose of obtaining data for verification of contactor computer programs. This work is in support of safeguards programs related to determination of near real-time inventories in pulsed columns. Holdup tests were performed resulting in the derivation of an empirical equation for estimation of the dispersed phase holdup in a column. Uranium solvent extraction mass-transfer tests were conducted in which all four process cycles were simulated under coprocessing flowsheet conditions. Extensive data were obtained during these tests on uranium profiles and inventories within the columns. Transient profile data were also determined between selected runs under the tested operating conditions. No concentration peaks could be observed during the transient period. Based on the extensive inventory data taken, empirical equations were developed for relating uranium inventory in a column to the test parameters. These equations were found useful for predicting and estimating the column inventory under the known run conditions.
Research Organization:
Allied-General Nuclear Services, Barnwell, SC (United States)
Sponsoring Organization:
USDOE
DOE Contract Number:
AC09-78ET35900
OSTI ID:
706366
Report Number(s):
AGNS--35900-3.1-111
Country of Publication:
United States
Language:
English