Influence of initial texture on the microstructural instabilities during compression of commercial [alpha]-titanium at 25 C to 400 C

Journal Article · Fri Jul 01 00:00:00 EDT 1994 · Metallurgical Transactions, A (Physical Metallurgy and Materials Science); (United States)

OSTI ID:7029405

Kailas, S V; Prasad, Y V.R.K.; Biswas, S K ^[1]

---

1. Indian Inst. of Science, Bangalore (India)

Cylindrical specimens of textured commercial pure [alpha]-titanium plate, cut with the cylinder axis along the rolling direction for one set of experiments and in the long transverse direction for the other set, were compressed at strain rates in the range of 0.001 to 100 s[sup [minus]1] and temperatures in the range of 25 C to 400 C. At strain rates [ge] 1 s[sup [minus]1], both sets of specimens exhibited adiabatic shear bands, but the intensity of shear bands was found to be higher in the rolling direction specimens than in the long transverse direction specimens. At strain rates [le]0.1 s[sup [minus]1], the material deformed in a microstructurally inhomogeneous fashion. For the rolling direction specimens, cracking was observed at 100 C and at strain rates [le]0.1 s[sup [minus]1]. This is attributed to dynamic strain aging. Such cracking was not observed in the long transverse specimens. The differences in the intensity of adiabatic shear bands and that of dynamic strain aging between the two sets of test specimens are attributed to the strong crystallographic texture present in these plates.

• OSTI ID: 7029405
• Journal Information: Metallurgical Transactions, A (Physical Metallurgy and Materials Science); (United States), Vol. 25:7; ISSN 0360-2133
• Country of Publication: United States
• Language: English

Related Subjects

36 MATERIALS SCIENCE
TITANIUM-ALPHA
DEFORMATION
MICROSTRUCTURE
EXPERIMENTAL DATA
MECHANICAL TESTS
DATA
ELEMENTS
INFORMATION
MATERIALS TESTING
METALS
NUMERICAL DATA
TESTING
TITANIUM
TRANSITION ELEMENTS
360102* - Metals & Alloys- Structure & Phase Studies
360103 - Metals & Alloys- Mechanical Properties