Analysis and design of a series voltage unbalance compensator based on a three-phase VSI operating with unbalanced switching functions
Journal Article
·
· IEEE Transactions on Power Electronics (Institute of Electrical and Electronics Engineers); (United States)
- Univ. Federal de Santa Maria (Brazil)
- Concordia Univ., Montreal, Quebec (Canada). Dept. of Electrical and Computer Engineering
Voltage unbalance in ac supply systems is typically corrected by means of a shunt connected thyristor-controlled static VAR compensator. This approach has the disadvantage of slow response, harmonic injection into the ac system, and the requirement for large passive components. The proposed system consists of a three-phase PWM voltage source inverter, connected in series with the line through a three-phase transformer. The unbalance compensation is achieved by canceling the negative sequence component of the line-to-line voltages of the source. It is also shown that by having the inverter operate with unbalanced switching functions, it is possible to balance the load voltage and to control the amplitude of the positive sequence component in order to perform load voltage regulation. A complete mathematical description of the method is presented, demonstrating that the compensation can be achieved with low kVA inverters and low harmonic injection. Implementation procedures, design equations, and a design example are also included in order to illustrate the proposed method. Experimental results of a 1.5 kVA laboratory prototype system confirm the feasibility of the technique.
- OSTI ID:
- 6969941
- Journal Information:
- IEEE Transactions on Power Electronics (Institute of Electrical and Electronics Engineers); (United States), Journal Name: IEEE Transactions on Power Electronics (Institute of Electrical and Electronics Engineers); (United States) Vol. 9:3; ISSN ITPEE8; ISSN 0885-8993
- Country of Publication:
- United States
- Language:
- English
Similar Records
Voltage and Current Unbalance Compensation Using a STATCOM
Design of computerized unbalance measuring system
Static shunt compensation for voltage flicker reduction and power factor correction
Journal Article
·
Thu Dec 31 23:00:00 EST 2009
· IET Power Electronics
·
OSTI ID:1027808
Design of computerized unbalance measuring system
Conference
·
Sat Dec 30 23:00:00 EST 1995
·
OSTI ID:433816
Static shunt compensation for voltage flicker reduction and power factor correction
Conference
·
Wed Dec 31 23:00:00 EST 1975
· Proc. Am. Power Conf.; (United States)
·
OSTI ID:5274118