Skip to main content
U.S. Department of Energy
Office of Scientific and Technical Information

A proposed deformation mechanism for high strain-rate superplasticity

Journal Article · · Scripta Metallurgica et Materialia
 [1]; ;  [2]
  1. Hong Ik Univ., Seoul (Korea, Republic of)
  2. Stanford Univ., CA (United States). Dept. of Materials Sciences and Engineering

Superplasticity at high deformation rates is desirable in order to make superplastic forming more practical. Recently, superplasticity was achieved at strain rates between 10{sup {minus}2} and 100 s{sup {minus}1} in powder-metallurgy (PM) processed and mechanically alloyed (MA) aluminum alloys. The purpose of this paper is to understand the rate-controlling-deformation mechanisms for ultrafine-grained aluminum materials where high-strain-rate superplasticity is observed. The stress-strain rate relations for IM, PM and MA materials are analyzed in terms of deformation mechanism maps, and in terms of the contribution of subgrain boundaries to the enhancement of grain boundary sliding. Conclusions are as follows: (1) Lattice-diffusion-controlled grain boundary sliding is believed to be the rate-controlling mechanisms for high-strain-rate superplasticity in PM and MA aluminum alloys. (2) Construction of deformation mechanisms maps based on diffusional creep, grain boundary sliding and dislocation creep illustrate the importance of grain size in achieving high-strain- rate-superplasticity. (3) The Ball-Hutchinson model for grain-boundary sliding has been modified to include the influence of subgrain size in enhancing the grain boundary sliding process. (4) The introduction of threshold stress for grain boundary sliding and the important contribution of grain and subgrains permit unification of all superplastic IM, PM and MA aluminum data available.

OSTI ID:
69654
Journal Information:
Scripta Metallurgica et Materialia, Journal Name: Scripta Metallurgica et Materialia Journal Issue: 10 Vol. 32; ISSN 0956-716X; ISSN SCRMEX
Country of Publication:
United States
Language:
English

Similar Records

Dislocation model for continuous recrystallization during initial stage of superplastic deformation
Journal Article · Mon Feb 02 23:00:00 EST 1998 · Scripta Materialia · OSTI ID:605678

A micromechanistic model of superplastic behavior in pseudo single phase aluminum alloys
Journal Article · Mon May 01 00:00:00 EDT 1995 · Scripta Metallurgica et Materialia · OSTI ID:64368

Superplasticity in aluminum alloys
Technical Report · Sun Nov 30 23:00:00 EST 1997 · OSTI ID:574532