Fabrication and test of an articulated remote manual roof bolter. Open file report 26 Sep 80-19 Sep 83
Technical Report
·
OSTI ID:6943662
The objective of this investigation was to fabricate, laboratory test, and perform an underground test and evaluation prototype articulating remote manual bolter for greater-than-seam-height bolting. The machine operator is located under supported roof approximately 5 ft from the bolt being installed. The results demonstrate that roof bolting with the articulating chassis and the operator approximately 5 ft from the bolting operation is feasible.
- Research Organization:
- Bendix Corp., Englewood, CO (USA). Energy, Environment, and Technology Office
- OSTI ID:
- 6943662
- Report Number(s):
- PB-84-157866
- Country of Publication:
- United States
- Language:
- English
Similar Records
Remote operator coal mine roof bolter concepts utilizing existing techniques and components. Open file report (final), Oct 77-Sep 78
Standardization of controls for roof-bolter machines. Volume 2. Open File report
Standardization of controls for roof-bolter machines: Executive Summary. Volume 1. Open File report
Technical Report
·
Fri Sep 01 00:00:00 EDT 1978
·
OSTI ID:6922776
Standardization of controls for roof-bolter machines. Volume 2. Open File report
Technical Report
·
Thu Mar 31 23:00:00 EST 1983
·
OSTI ID:5464145
Standardization of controls for roof-bolter machines: Executive Summary. Volume 1. Open File report
Technical Report
·
Sat Oct 01 00:00:00 EDT 1983
·
OSTI ID:5663678