skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Alkali metal vapor removal from a pressurized fluidized-bed combustor process stream: Annual report, October 1985-September 1986

Technical Report ·
OSTI ID:6916991

A laboratory-scale pressurized fluidized-bed coal combustor (PFBC)/ alkali sorber was used (1) to measure the alkali vapor (Na and K) concentration in a PFBC process stream on a real-time on-line basis and (2) to demonstrate simultaneously the granular-bed sorber concept for the removal of alkali vapors from a hot PFBC process stream. An Ames alkali analyzer was used as an on-line, real-time monitor. A batch-type alkali and particulate sampling train (APST) was also installed as a backup for the analysis of both alkali vapor and particulate loading in the gas stream. Three test series of the PFBC/alkali sorber unit were run with Pittsburgh Sewickley coal and Tymochtee dolomite at an average bed temperature ranging from 900 to 925/degree/C and a system pressure of 9 atm absolute. In all three test series, NaCl vapor was injected into the sorber unit to provide about 580 ppbW in the PFBC process stream. In all three test series, the injected NaCl vapor was not detected by both the Ames alkali analyzer and the APST. It was significantly captured by the fly ash. The high-temperature stainless-steel sampling line could also be a sink for the NaCl vapor. 24 refs., 21 figs., 14 tabs.

Research Organization:
Argonne National Lab., IL (USA)
DOE Contract Number:
W-31109-ENG-38
OSTI ID:
6916991
Report Number(s):
ANL/FE-88-3; ON: DE88013966
Resource Relation:
Other Information: Paper copy only, copy does not permit microfiche production
Country of Publication:
United States
Language:
English