Skip to main content
U.S. Department of Energy
Office of Scientific and Technical Information

Thermal energy storage for industrial waste heat recovery

Conference ·
OSTI ID:6898033
An examination of the potential for energy conservation in five industrial categories has been completed under the first phase of a DOE study into the recovery and reuse of industrial waste heat through thermal energy storage. These five industries--aluminum, cement, food processing, paper and pulp, and iron and steel--represent only a part (albeit a significant part) of the total potential for energy savings. A possible savings of more than 15 x 10/sup 6/ bbls oil/yr appears possible. Some of this savings (about 4 x 10/sup 6/ bbl/yr) could be available in the near term (1 to 2 yrs) at moderate costs; demonstration for recovery of the remainder, being dependent on further technology development and significant capital investment, appears feasible on a 10-yr time scale. Other categories consuming more than 2% of the total national industrial energy usage (e.g., electronics and electrical equipment, glass, petroleum and coal, plastics, rubber, and textiles) must still be considered before a picture of the total energy savings potential in the industrial sector can be fully developed.
Research Organization:
Oak Ridge National Lab., TN (USA); National Aeronautics and Space Administration, Cleveland, OH (USA). Lewis Research Center
DOE Contract Number:
W-7405-ENG-26
OSTI ID:
6898033
Report Number(s):
CONF-780801-31
Country of Publication:
United States
Language:
English