Skip to main content
U.S. Department of Energy
Office of Scientific and Technical Information

Enthalpy measurements on distillate cuts of syncrudes produced from the solvent refined coal processes

Journal Article · · Ind. Eng. Chem. Process Des. Dev.; (United States)
DOI:https://doi.org/10.1021/i200025a015· OSTI ID:6877944

Enthalpy data are presented at 14 pressures between 210 and 10340 kPa (30 and 1500 psia) for temperatures between 18.3 and 382/sup 0/C (65 to 720/sup 0/F) for a naphtha cut distilled from a coal-derived liquid produced by the Solvent Refined Coal-I (SRC-I) process. Data are also reported for two distillates produced by the Solvent Refined Coal-II (SRC-II) process. Measurements for the naphtha were obtained at pressures of 690, 1380, and 2060 kPa (100, 200, 300 psia) at temperatures from 18.3 to 237/sup 0/C (65 to 459/sup 0/F), and measurements for the middle boiling range distillate were obtained at pressures of 895, 1035, 2070, and 6895 kPa (130, 150, 300, 1000 psia) at temperatures from 18.3 to 357/sup 0/C (65 to 675/sup 0/F). The data were obtained in a boil-off calorimeter with Freon-11 (CFC1/sub 3/) as a reference fluid.

Research Organization:
Department of Chemical and Petroleum Refining Engineering, Colorado School of Mines, Golden, Colorado
OSTI ID:
6877944
Journal Information:
Ind. Eng. Chem. Process Des. Dev.; (United States), Journal Name: Ind. Eng. Chem. Process Des. Dev.; (United States) Vol. 23:2; ISSN IEPDA
Country of Publication:
United States
Language:
English