Skip to main content
U.S. Department of Energy
Office of Scientific and Technical Information

Arrays of Josephson tunnel junctions as parametric amplifiers

Journal Article · · J. Appl. Phys.; (United States)
DOI:https://doi.org/10.1063/1.325341· OSTI ID:6847711

Arrays of 10 or 40 series-connected small densely packed Josephson tunnel junctions were successfully operated as parametric amplifiers at 10 GHz. Between 50 and 90% of the junctions in an array were observed to work coherently in the amplification process. Signal gain exceeding 24 dB was achieved with a pump power as low as -50 to -70 dBm. A power width (i.e., the range of the pump power for a gain within 3 dB of the peak gain) of 0.25 dB and a bandwidth of 15 MHz were measured for 20-dB gain. The power width was in accordance with theory but the bandwidth was reduced, probably due to noise saturation effects. The latter effects can be reduced by lowering the input noise temperature or by including an external band limitation. The noise temperature was also increased by saturation; however, with an external bandwidth of 60 MHz, a noise temperature of 30 +- 20 K was measured. The application of a magnetic field has proved extremely useful as a means of tuning the amplifiers to stable high-gain operating points. This tuning was also utilized in evaluating the amplifier parameters, and the theory by Feldman, Parrish, and Chiao has been verified. The upper frequency limit for a lead tunnel junction amplifier ought to be well above 300 GHz.

Research Organization:
Physics Department, Chalmers University of Technology, Fack, S-402 20 Goeteborg, Sweden
OSTI ID:
6847711
Journal Information:
J. Appl. Phys.; (United States), Journal Name: J. Appl. Phys.; (United States) Vol. 49:7; ISSN JAPIA
Country of Publication:
United States
Language:
English