Quench propagation and training in simulated superconducting magnet windings
Conference
·
OSTI ID:6825686
Training behavior similar to that which occurs in full scale superconducting accelerator magnets has been observed in small test windings. The test coils are formed from approximately 20 meters of conductor wound non-inductively, in Bifilar fashion. The resulting racetrack shaped coil is molded at elevated temperature to simulate the construction techniques used for the ISABELLE dipoles. The quench current of such windings has been measured as a function of applied field and the effect of parameters such as mechanical loading and porosity have been investigated. The velocity of propagation of the normal front has been measured both along and transverse to the direction of current flow for several test windings. The minimum energy required to produce a self propagating normal zone has also been determined in an attempt to quantify the relative stability of the coils.
- Research Organization:
- Brookhaven National Lab., Upton, NY (USA)
- DOE Contract Number:
- AC02-76CH00016
- OSTI ID:
- 6825686
- Report Number(s):
- BNL-29252; CONF-810314-55
- Country of Publication:
- United States
- Language:
- English
Similar Records
Heater-induced quenches in a model field winding for the 70MW class superconducting generator
Tool Chain for Simulations of Bi-Filar Coil Winding for Fast Quench Protection
Isabelle dipole and quadrupole coil configurations
Conference
·
Thu Feb 28 23:00:00 EST 1991
· IEEE Transactions on Magnetics (Institute of Electrical and Electronics Engineers); (United States)
·
OSTI ID:6090108
Tool Chain for Simulations of Bi-Filar Coil Winding for Fast Quench Protection
Conference
·
Wed Aug 06 20:00:00 EDT 2025
· No journal information
·
OSTI ID:3019402
Isabelle dipole and quadrupole coil configurations
Conference
·
Mon Dec 31 23:00:00 EST 1979
·
OSTI ID:6810896