Low stress level drillstrings cut costs, perform better

Journal Article · Sat Oct 01 04:00:00 EDT 1988 · World Oil; (United States)

OSTI ID:6776863

Dudman, R L ^[1]

---

1. PinTec Services, Inc., Luling, TX (US)

Industry still drills far too many crooked holes and abuses poorly designed drillstrings, which suffer fatigue failure. This costly waste could be eliminated by using low-stress-level drillstrings, adequate packed hole assemblies and good drilling practices. This article discusses some of these problems. Fatigue failures in derricks, drawworks, engines, pumps, rotary tables and BOP stacks are not tolerated. Failures indicate that the steel parts are being worked or abused beyond the steel's endurance limit. In case of failure, the operating conditions are adjusted in order not to accumulate fatigue or, usually, a stronger piece of equipment is utilized that will not experience failures in the future. Drillstring fatigue failure and the drilling of a crooked hole plagued with doglegs, spirals and keyseats appears to be an accepted, expensive operating practice. The desire to increase penetration rates without regard for the endurance limit of components causes premature downhole failures in a high-stress-level drillstring. Drilling a crooked hole with doglegs, spirals and keyseats increases drilling stresses. Both fatigue failure and crooked hole problems can be minimized, if not eliminated, with the use of a low-stress-level drillstring.

• OSTI ID: 6776863
• Journal Information: World Oil; (United States), Journal Name: World Oil; (United States) Vol. 207:4; ISSN WOOIA
• Country of Publication: United States
• Language: English

Related Subjects

02 PETROLEUM
020200* -- Petroleum-- Reserves
Geology
& Exploration
ALLOYS
BOREHOLES
CAVITIES
DESIGN
DRILLING
ENGINES
EQUIPMENT
FATIGUE
FIELD PRODUCTION EQUIPMENT
IRON ALLOYS
IRON BASE ALLOYS
MECHANICAL PROPERTIES
PUMPS
STEELS
STRESSES
WELL DRILLING
WELL RECOVERY EQUIPMENT