skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Report of the Fourth interim meeting of the Seabed Working Group Engineering Studies Task Group, 3-6 October 1983, at Rijks Geologische Dienst, Haarlem, The Netherlands

Technical Report ·
OSTI ID:6723897

This report presents the results of the fourth interim meeting of the Seabed Working Group's (SWG) Engineering Studies Task Group (ESTG). This task group is charged with determining whether the engineering technology exists to emplace waste canisters in deep ocean sediments. The fourth interim meeting, held at Rijks Geologische Dienst, Haarlem, The Netherlands, 3-6 October 1983, reviewed progress made by the various national programs since the ESTG third interim meeting (July 1982) and developed a table of requirements for processing samples for a geotechnical properties data base. Other items addressed were (1) potential methods of instrumenting penetrators to obtain in situ measurements, (2) procedures for evaluating and quantifying the disturbed zone created by an emplaced penetrator, (3) review and modification of the current draft version of the SWG Five-Year Plan, (4) review and extension of the ESTG detailed plan for penetrator tests, and (5) details of the penetrator tests scheduled for March 1984 in the Nares Abyssal Plain using the research vessel M/V TYRO. The review of the national programs indicated significant progress when measured against the integrated ESTG five-year plan which results in a joint evaluation of engineering feasibility of subseabed disposal based upon (1) a demonstration of an emplacement capability, (2) an evaluation of the zone of sediment disturbance created during emplacement, (3) the existence of acceptable emplacement models, and (4) an acceptable engineering data base. A table of geotechnical sample-processing requirements is being developed to provide guidance for the other task groups that may have the opportunity to furnish suitable geotechnical samples to the ESTG as well as to provide some measure of consistency within the ESTG for the development of the engineering data base for the SWG study areas.

Research Organization:
Sandia National Labs., Albuquerque, NM (USA)
DOE Contract Number:
AC04-76DP00789
OSTI ID:
6723897
Report Number(s):
SAND-83-2333; ON: DE84015096
Resource Relation:
Other Information: Portions are illegible in microfiche products. Original copy available until stock is exhausted
Country of Publication:
United States
Language:
English