Heat transfer analysis of the passive residual heat removal system in ROSA/AP600 experiments
- Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan)
- Nagoya Univ., Furo, Chikusa (Japan). Dept. of Energy Engineering and Science
- Idaho National Engineering and Environmental Lab., Idaho Falls, ID (United States). Dept. of Nuclear Engineering
The passive residual heat removal (PRHR) system in the Westinghouse AP600 advanced passive reactor design is a natural-circulation-driven heat exchanger cooled by the water in the in-containment refueling water storage tank (IRWST). During the experiments, which simulated small-break loss-of-coolant accidents in the AP600 reactor using the ROSA-V Large-Scale Test Facility (LSTF), the PRHR system heat removal rates well exceeded the core decay power soon after the actuation of the PRHR. This resulted in continuous cooldown and depressurization of the primary side. The PRHR heat transfer performance in these experiments was analyzed by applying heat transfer correlations available in literature to the PRHR heat exchanger tube bundle. Also, the three-dimensional natural circulation in the IRWST was simulated numerically using the FLUENT code. The total heat transfer rate of the PRHR was predicted within 5% of the measured value. The fluid temperature distribution in the IRWST was also predicted well except that the elevation of the thermally stratified region was underpredicted. The calculated flow pattern in the IRWST suggests that the atypical IRWST geometry in the LSTF may have affected the PRHR heat transfer performance during the experiments only a little.
- OSTI ID:
- 669873
- Journal Information:
- Nuclear Technology, Vol. 124, Issue 1; Other Information: PBD: Oct 1998
- Country of Publication:
- United States
- Language:
- English
Similar Records
Non-condensable gas effects in ROSA/AP600 small-break LOCA experiments
AP600 passive residual heat removal heat exchanger test