High-average-power 1-{mu}m performance and frequency conversion of a diode-end-pumped Yb:YAG laser

Journal Article · Thu Oct 01 00:00:00 EDT 1998 · IEEE Journal of Quantum Electronics

DOI:https://doi.org/10.1109/3.720241· OSTI ID:669839

Bibeau, C; Beach, R J; Mitchell, S C; Emanuel, M A; Skidmore, J; Ebbers, C A; Sutton, S B; Jancaitis, K S ^[1]

---

1. Lawrence Livermore National Lab., CA (United States)

Using a diode-end-pumped technology, a Yb:YAG laser capable of delivering up to 434 W of CW power has been demonstrated. The system incorporates a unique composite rod design which allows for high-average-power operation while simultaneously suppressing parasitic oscillations. Modeling and experimental data to support the quenching of parasitics are discussed. Beam quality measurements for CW operation with several cavity configurations are presented. In particular, beam quality measurements at 340-W CW yielded a beam quality factor of M{sup 2} = 21. Predictions of a quasi-three-level model are compared with the experimental data for several output coupler reflectivities. An observed dependence of the cavity mode fill as a function of output coupler reflectivity is discussed. Employing a single acoustooptical switch, the system was Q-switched at 10 kHz and generated output powers up to 280 W with a measured beam quality of M{sup 2} = 6.8 at 212 W. With an external dual-KTP crystal configuration, the Q-switched output was frequency converted to 515 nm and produced up to 76 W at 10 kHz in a 30-ns pulse length.

• OSTI ID: 669839
• Journal Information: IEEE Journal of Quantum Electronics, Vol. 34, Issue 10; Other Information: PBD: Oct 1998
• Country of Publication: United States
• Language: English

Related Subjects

42 ENGINEERING NOT INCLUDED IN OTHER CATEGORIES
DIODE-PUMPED SOLID STATE LASERS
POWER
DESIGN
LASER CAVITIES
PERFORMANCE
Q-SWITCHING
FREQUENCY CONVERTERS
ALUMINIUM OXIDES
YTTRIUM COMPOUNDS
FERRITE GARNETS
DOPED MATERIALS
YTTERBIUM