Strength testing of hot gas filters: Volume 6. Final report
The strength of various ceramic hot gas filter materials has been evaluated by four laboratories: Argonne National Laboratory, DuPont Lanxide, Southern Research Institute and Babcock and Wilcox. The filter materials under study include (a) a Nextel{trademark}/SiC composite filter (from 3M), (b) PRD-66, an all oxide layered microstructure of alumina, mullite, cordierite and some amorphous material by DuPont Lanxide, (c) a Babcock and Wilcox material consisting of an oxide composite of chopped fibers (Saffil) and continuous Nextel fibers, (d-f) monolithic and recrystallized SiC materials and an alumino/aluminosilicate material by IFPM, and (g) a monolithic SiC by the Pall Corporation. Not all four organizations tested each of the materials. PRD-66 was tested by three of the four. Four tests were used to evaluate properties of the candle filter materials. They included (a) the C-ring test, (b) the O-ring test, (c) the burst test and (d) the axial compression test. Each organization identified above did not perform all four tests. The objective of the study described here was to (a) provide an evaluation of the test methods used for hot gas filters to determine which is best for hot gas filter evaluation and (b) evaluate the discrepancies in results from tests run at different laboratories. No material ranking was made here, nor requested.
- Research Organization:
- Northwestern Univ., Evanston, IL (United States)
- Sponsoring Organization:
- USDOE Assistant Secretary for Fossil Energy, Washington, DC (United States)
- DOE Contract Number:
- AC21-95MC32085
- OSTI ID:
- 656597
- Report Number(s):
- DOE/MC/32085--99-Vol.6; ON: DE98054472
- Country of Publication:
- United States
- Language:
- English
Similar Records
Filter component assessment
Ceramic component development analysis -- Volume 1. Final report