Frictional heating and convective cooling of polycrystalline diamond drag tools during rock cutting

Journal Article · Sun Apr 01 04:00:00 EST 1984 · SPEJ, Soc. Pet. Eng. J.; (United States)

DOI:https://doi.org/10.2118/11061-PA· OSTI ID:6560608

Ortega, A; Glowka, D A

A numerical-analytical model is developed to predict temperatures in stud-mounted polycrystalline diamond compact (PDC) drag tools during rock cutting. Experimental measurements of the convective heat-transfer coefficient for PDC cutters are used in the model to predict temperatures under typical drilling conditions with fluid flow. The analysis compares favorably with measurements of frictional temperatures in controlled cutting tests on Tennessee marble. An equation incorporating several drilling parameters is developed to predict the mean operating temperature across the cutter wearflat, defined as that portion of the cutter surface that wears against the rock formation. It is shown that mean wearflat temperatures can be maintained below a maximum safe value of 750/sup 0/C (1,382/sup 0/F) only under conditions of low friction at the cutter/rock interface, regardless of the level of convective cooling. The ability of liquid drilling fluids to reduce interface friction is thus shown to be far more important in preventing excessive temperatures than their ability to provide cutter cooling. Because of the relatively high interface friction developed under typical air drilling conditions, it is doubtful that temperatures can be kept subcritical at high rotary speeds in some formations when air is employed as the drilling fluid.

• Research Organization: Sandia National Laboratories
• OSTI ID: 6560608
• Journal Information: SPEJ, Soc. Pet. Eng. J.; (United States), Journal Name: SPEJ, Soc. Pet. Eng. J.; (United States) Vol. 24:2; ISSN SSPJD
• Country of Publication: United States
• Language: English

Related Subjects

42 ENGINEERING
420206* -- Engineering-- Mining & Drilling Equipment & Facilities-- (1980-1989)
CARBON
CONTROL
CONVECTION
COOLING
CUTTING TOOLS
DIAMONDS
DRILL BITS
DRILLING
DRILLING EQUIPMENT
DRILLING FLUIDS
ELEMENTAL MINERALS
ELEMENTS
ENERGY TRANSFER
EQUIPMENT
FLUIDS
FRICTION
HEAT TRANSFER
MASS TRANSFER
MINERALS
NONMETALS
ROCK DRILLING
TEMPERATURE CONTROL
TEMPERATURE MEASUREMENT
TOOLS
TRIBOLOGY