Tritium waste control: July--September 1978. [Catalytic exchange detritiation; fixation of aqueous tritiated waste in polymer-impregnated concrete; gas generation by self-radiolysis of polymer-impregnated concrete]

Technical Report · Fri Nov 10 04:00:00 EST 1978

DOI:https://doi.org/10.2172/6552669· OSTI ID:6552669

Embury, M. C.; Mills, T. K.; Rogers, M. L.; Gibbs, G. E.; Dauby, J. J.; Wieneke, R. E.; Tadlock, W.; Abell, G.

The combined Electrolysis Catalytic Exchange system was modified to allow better control of experimental conditions and to prevent the overflow of water into the air detritation system. A program designed to regenerate the activity of the hydrophobic catalyst was also completed. Slight differences in the release rate of high specific activity tritiated liquid wastes from the drums are now beginning to appear. The three drums with the highest fractional permeation rate had the least amount of tritium when packaged. The fractional permeation rate of the two octane drums appears to have leveled off at about the same rate as the oil and water drums. Tests continued on samples of cement and cement-plaster mixtures which were injected with 386 Ci of tritiated water, cured, and then impregnated with catalyzed styrene monomer. After polymerization, the samples were put into uncontaminated water and the tritium concentration was monitored. No significant differences were noted except in two cases when the polyethylene bottle had been removed, which resulted in 35 to 80 times more tritium being released into the surrounding water. Full scale (cold) waste drum No. 5 was polymerized with excellent results. Pressure increase and gas composition were measured over (1) tritiated water without fixation, (2) polymer-impregnated concrete, and (3) nonpolymer concrete. Activities for all samples were 10 Ci/m/sup 3/. Pressure buildup results are essentially the same for concrete made with tritiated distilled water and tritiated waste water. However, the pressure buildup rate is slightly higher for the polymer impregnated concrete than for the nonpolymer concrete. Mass analysis of the cover gas over tritiated water without fixation and over the polymer and nonpolymer concrete samples made with tritiated waste water show that hydrogen represents about 85% of the gas generated.

• Research Organization: Mound Facility, Miamisburg, OH (USA)
• Sponsoring Organization: USDOE - Office of Defense Programs (DP)
• DOE Contract Number: EY-76-C-04-0053
• OSTI ID: 6552669
• Report Number(s): MLM--2567
• Country of Publication: United States
• Language: English

Related Subjects

052001* -- Nuclear Fuels-- Waste Processing
12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE WASTES FROM NUCLEAR FACILITIES
BETA DECAY RADIOISOTOPES
BETA-MINUS DECAY RADIOISOTOPES
BUILDING MATERIALS
CATALYSTS
CHEMICAL RADIATION EFFECTS
CHEMICAL REACTIONS
CHEMISTRY
CLEANING
CONCRETES
DECOMPOSITION
DECONTAMINATION
ELECTROLYSIS
HIGH-LEVEL RADIOACTIVE WASTES
HYDROGEN ISOTOPES
IRRADIATION
ISOTOPES
ISOTOPIC EXCHANGE
LIGHT NUCLEI
LIQUID WASTES
LYSIS
MANAGEMENT
MATERIALS
NUCLEI
ODD-EVEN NUCLEI
PHASE TRANSFORMATIONS
PROCESSING
RADIATION CHEMISTRY
RADIATION EFFECTS
RADIOACTIVE MATERIALS
RADIOACTIVE WASTE MANAGEMENT
RADIOACTIVE WASTE PROCESSING
RADIOACTIVE WASTES
RADIOISOTOPES
RADIOLYSIS
RESEARCH PROGRAMS
SELF-IRRADIATION
SOLIDIFICATION
TRITIUM
WASTE MANAGEMENT
WASTE PROCESSING
WASTES
YEARS LIVING RADIOISOTOPES
catalytic exchange
concrete
detritiation
effluents
electrolysis
light water reactors
liquid wastes
polymers
separation
tritium