Skip to main content
U.S. Department of Energy
Office of Scientific and Technical Information

Fission gas release from ThO/sub 2/ and ThO/sub 2/--UO/sub 2/ fuels (LWBR development program)

Technical Report ·
DOI:https://doi.org/10.2172/6546045· OSTI ID:6546045
Fission gas release data are presented from 51 fuel rods irradiated as part of the LWBR irradiations test program. The fuel rods were Zircaloy-4 clad and contained ThO/sub 2/ or ThO/sub 2/-UO/sub 2/ fuel pellets, with UO/sub 2/ compositions ranging from 2.0 to 24.7 weight percent and fuel densities ranging from 77.8 to 98.7 percent of theoretical. Rod diameters ranged from 0.25 to 0.71 inches and fuel active lengths ranged from 3 to 84 inches. Peak linear power outputs ranged from 2 to 22 kw/ft for peak fuel burnups up to 56,000 MWD/MTM. Measured fission gas release was quite low, ranging from 0.1 to 5.2 percent. Fission gas release was higher at higher temperature and burnup and was lower at higher initial fuel density. No sensitivity to UO/sub 2/ composition was evidenced.
Research Organization:
Bettis Atomic Power Lab., West Mifflin, PA (USA)
DOE Contract Number:
EY-76-C-11-0014
OSTI ID:
6546045
Report Number(s):
WAPD-TM-1350
Country of Publication:
United States
Language:
English