skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Component design challenges for the ground-based SP-100 nuclear assembly test

Conference · · Transactions of the American Nuclear Society; (USA)
OSTI ID:6530420

The SP-100 ground engineering system (GES) program involves a ground test of the nuclear subsystems to demonstrate their design. The GES nuclear assembly test (NAT) will be performed in a simulated space environment within a vessel maintained at ultrahigh vacuum. The NAT employs a radiation shielding system that is comprised of both prototypical and nonprototypical shield subsystems to attenuate the reactor radiation leakage and also nonprototypical heat transport subsystems to remove the heat generated by the reactor. The reactor is cooled by liquid lithium, which will operate at temperatures prototypical of the flight system. In designing the components for these systems, a number of design challenges were encountered in meeting the operational requirements of the simulated space environment (and where necessary, prototypical requirements) while also accommodating the restrictions of a ground-based test facility with its limited available space. This paper presents a discussion of the design challenges associated with the radiation shield subsystem components and key components of the heat transport systems.

OSTI ID:
6530420
Report Number(s):
CONF-891103-; CODEN: TANSA; TRN: 90-036000
Journal Information:
Transactions of the American Nuclear Society; (USA), Vol. 60; Conference: Winter meeting of the American Nuclear Society (ANS) and nuclear power and technology exhibit, San Francisco, CA (USA), 26-30 Nov 1989; ISSN 0003-018X
Country of Publication:
United States
Language:
English