Skip to main content
U.S. Department of Energy
Office of Scientific and Technical Information

Influence of an immobile or mobile saturation on non-Darcy compressible flow of real gases in propped fractures

Journal Article · · J. Pet. Technol.; (United States)
DOI:https://doi.org/10.2118/15066-PA· OSTI ID:6502553
The effects of immobile and mobile liquid saturations on the non-Darcy flow coefficient in propped fractures have been investigated. It was observed that an immobile liquid saturation of up to 20% PV can triple the non-Darcy flow coefficient and a small mobile liquid saturation will increase the non-Darcy flow coefficient by nearly an order of magnitude (over that of the dry case). The linear relationship between the logarithm of the non-Darcy flow coefficient and the logarithm of the proppant permeability for propped fractures, as proposed by Cooke, is shown to be invalid in the presence of an immobile or mobile liquid saturation. Constants are presented that can be used to obtain a more accurate approximation than has previously been available on the non-Darcy flow coefficient for single-phase flow in fractures propped with 10/20- and 20/40-mesh Ottawa sand. The experimental data obtained from this research was compared with those of others reported in the literature.
OSTI ID:
6502553
Journal Information:
J. Pet. Technol.; (United States), Journal Name: J. Pet. Technol.; (United States) Vol. 40:10; ISSN JPTJA
Country of Publication:
United States
Language:
English

Similar Records

Non-Darcy gas flow through propped fractures; Effects of partial saturation, gel damage, and stress
Journal Article · Tue Oct 31 23:00:00 EST 1989 · SPE (Society of Petroleum Engineers) Production Engineering; (USA) · OSTI ID:5341832

Non-Darcy compressible flow of real gases in propped fracture
Conference · Wed Sep 01 00:00:00 EDT 1982 · Soc. Pet. Eng. AIME, Pap.; (United States) · OSTI ID:5451936

The effect of an immobile liquid saturation on the non-Darcy flow coefficient in porous media
Journal Article · Sat Oct 31 23:00:00 EST 1987 · SPE (Society of Petroleum Engineers) Product. Eng.; (United States) · OSTI ID:5542718