Design of a 100 MW X-band klystron
Future linear colliders will require klystrons with higher peak power at higher frequency than are currently in use. SLAC is currently designing a 100 MW klystron at 11.4 GHz as a prototype for such a tube. The gun has been designed for 440 KV and 510 amps. Transporting this beam through a 5 mm radius X-band drift tube presents the major design problem. The area convergence ratio of 190 to one is over ten times higher than is found in conventional klystrons. Even with high magnetic fields of 6 to 7 kilogauss careful matching is required to prevent excessive scalloping. Extensive EGUN and CONDOR simulations have been made to optimize the transmission and rf efficiency. The EGUN simulations indicate that better matching is possible by using resonant magnetic focusing. CONDOR calculations indicate efficiencies of 45 percent are possible with a double output cavity. We will discuss the results of the simulations and the status of the experimental program. 3 refs., 6 figs., 2 tabs.
- Research Organization:
- Stanford Linear Accelerator Center, Menlo Park, CA (USA)
- DOE Contract Number:
- AC03-76SF00515
- OSTI ID:
- 6474245
- Report Number(s):
- SLAC-PUB-4900; CONF-890335-8-Vugraphs; ON: DE89008939
- Country of Publication:
- United States
- Language:
- English
Similar Records
100 MW klystron development at SLAC
Simulation of traveling-wave output structures for high power rf tubes