Low wear partially fluorinated polyimides
Tribological studies were conducted on five different polyimide solid bodies formulated from the diamine 2,2-bis 4-(4-aminophenoxy)phenyl hexafluoropropane (4-BDAF) and the dianhydrides pyromellitic acid (PMDS) and benzophenonetetracarboxylic acid (BTDA). The following polyimides were evaluated 4-BDAF/PMDA, 4-BDAF/BTDA, 4-BDAF/80 mole percent PMDA, 20 mole percent BTDA, 4-BDAF/60 mole percent BTDA. Friction coefficients, polyimide wear rates, polyimide surface morphology and transfer films were evaluated at sliding speeds of 0.31 to 11.6 m/s and at temperatures of 25 C to 300 C. The results indicate that the tribological properties are highly dependent on the composition of the polyimide and on the experimental conditions. Two polyimides were found which produced very low wear rates but very high friction coefficients (greater than 0.85) under ambient conditions. They offer considerable potential for high traction types of application such as brakes.
- Research Organization:
- National Aeronautics and Space Administration, Cleveland, OH (USA). Lewis Research Center
- OSTI ID:
- 6466405
- Report Number(s):
- N-84-24808; NASA-TM-83629; E-2066; CONF-8410135-1; TRN: 84-024903
- Resource Relation:
- Conference: Joint lubrication conference, San Diego, CA, USA, 22 Oct 1984
- Country of Publication:
- United States
- Language:
- English
Similar Records
Internal acetylene unit as a cross-link site for polyimides
Aromatic Polyimides with High Performances and Deuteration