Skip to main content
U.S. Department of Energy
Office of Scientific and Technical Information

Cyclic reheat materials evaluation - Part 3

Journal Article · · Mater. Performance; (United States)
OSTI ID:6439665
A cyclic reheat system for a wet flue gas desulfurization system extracts heat from the inlet flue gas and transfers this heat to the outlet flue gas. One method of achieving this reheat uses tube-type heat exchangers in the inlet and outlet gas streams with a fluid (e.g.,water) circulated between them. For plants burning high-sulfur coal, questions of materials selection and cleaning methods of the inlet heat exchanger exist because of the potential for acid condensation. An inlet gas heat exchanger test apparatus was built and installed on a slipstream taken after the precipitator of a high-sulfur, coal-fired power plant. Results obtained from the first 3061 h of exposure indicated low corrosion rates for several stainless steels and that a water wash prevented solids buildup on the heat exchanger tubes.
Research Organization:
Battelle Memorial Institute, 505 King Ave., Columbus, OH 43201
OSTI ID:
6439665
Journal Information:
Mater. Performance; (United States), Journal Name: Mater. Performance; (United States) Vol. 26:4; ISSN MTPFB
Country of Publication:
United States
Language:
English

Similar Records

Material and cleaning options for cyclic reheat systems
Technical Report · Fri Jan 31 23:00:00 EST 1986 · OSTI ID:5987749

Material and cleaning options for cyclic reheat systems: Midterm report: Interim report, September 1988
Technical Report · Thu Sep 01 00:00:00 EDT 1988 · OSTI ID:7101349

Material and cleaning options for cyclic reheat systems
Technical Report · Wed Feb 28 23:00:00 EST 1990 · OSTI ID:6976561