High-intensity multi-purpose piezoelectric pulsed molecular beam source
Journal Article
·
· Rev. Sci. Instrum.; (United States)
A piezoelectric valve is described which delivers intense gas pulses limited by the nozzle for diameters of up to 1.0 mm. Minimum pulse lengths between 0.15 and 0.25 ms (fwhm) are obtained at full opening, depending on the nozzle size. The upper limit of the repetition rate is near 1 kHz. The valve and its modifications meet almost all experimental requirements. In particular, ways of operating in a wide temperature range are outlined. Reliable operation with a remote nozzle at 77 K was recently demonstrated. Nozzle temperatures of more than 1000 K should be possible with a similar setup.
- Research Organization:
- Max-Planck-Institut fuer Quantenoptik, D 8046 Garching, Federal Republic of Germany
- OSTI ID:
- 6397603
- Journal Information:
- Rev. Sci. Instrum.; (United States), Vol. 60:4
- Country of Publication:
- United States
- Language:
- English
Similar Records
Note: A short-pulse high-intensity molecular beam valve based on a piezoelectric stack actuator
Full characterization of an intense pulsed hyperthermal molecular beam
A short pulse (7 {mu}s FWHM) and high repetition rate (dc-5kHz) cantilever piezovalve for pulsed atomic and molecular beams
Journal Article
·
Sat Nov 15 00:00:00 EST 2014
· Review of Scientific Instruments
·
OSTI ID:6397603
+2 more
Full characterization of an intense pulsed hyperthermal molecular beam
Journal Article
·
Sun May 15 00:00:00 EDT 2005
· Review of Scientific Instruments
·
OSTI ID:6397603
+3 more
A short pulse (7 {mu}s FWHM) and high repetition rate (dc-5kHz) cantilever piezovalve for pulsed atomic and molecular beams
Journal Article
·
Sun Nov 15 00:00:00 EST 2009
· Review of Scientific Instruments
·
OSTI ID:6397603
+4 more