Chemical reactions between aluminum and fly ash during synthesis and reheating of Al-fly ash composite
- Univ. of Wisconsin, Milwaukee, WI (United States). Dept. of Materials
Thermodynamic analysis indicates that there is the possibility of chemical reactions between aluminum melt and cenosphere fly ash particles. These particles contain alumina, silica, and iron oxide, which, during solidification processing of aluminum-fly ash composites or during holding of such composites at temperatures above the melting temperature of the aluminum, are likely to undergo chemical reduction. These chemical reactions between the fly ash and molten aluminum have been studied by metallographic examination, differential thermal analysis (DTA), scanning electron microscopy (SEM), energy-dispersive X-ray analysis (EDX) and X-ray analysis after holding the aluminum-fly ash composites for different periods above the liquidus temperature. The experiments indicate that there is progressive reduction of silica and mullite in the fly ash, and formation of alumina with holding time of composites at a temperature of 850 C. The walls of the cenosphere fly ash particles progressively disintegrate into discrete particles as the reaction progresses. The rate of chemical reaction was high at the start of holding the composite at a temperature of 850 C, and then the rate significantly decreased with time. The reaction was almost complete after 10 hours.
- OSTI ID:
- 634652
- Journal Information:
- Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science, Vol. 29, Issue 3; Other Information: PBD: Jun 1998
- Country of Publication:
- United States
- Language:
- English
Similar Records
Recovery of alumina from fly ash by high-temperature chlorination
Opportunities of using fly ash particles for synthesis of composites