Evolution of microstructure and tensile strength of rapidly solidified Al-4.7 pct Zn-2.5 pct Mg-0.2 pct Zr-X wt pct Mn alloys

Journal Article · Wed Jul 01 04:00:00 EDT 1998 · Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science

DOI:https://doi.org/10.1007/s11661-998-0012-6· OSTI ID:634562

Chang, J; Moon, I ^[1]; Choi, C ^[2]

---

1. Korea Inst. of Science and Technology, Seoul (Korea, Republic of). Div. of Metals
2. Yonsei Univ., Seoul (Korea, Republic of). Dept. of Metallurgical Engineering

Analytical transmission electron microscopy and thermal analysis of as-extruded Al-4.7 pct Zn-2.5 pct Mg-0.2 pct Zr-X wt pct Mn alloys, with Mn contents ranging from 0.5 to 2.5 wt pct, were carried out to elucidate the microstructural change and accompanying mechanical properties during subsequent heat treatments. The as-extruded alloy was fabricated from rapidly solidified powder and consisted of a fine, metastable manganese dispersoid and the ternary eutectic T phase (Al{sub 2}Mg{sub 3}Zn{sub 3}). Solution heat treatment resulted in the formation of the stable Al{sub 6}Mn phase and complete dissolution of the T phase. Formation of stable Al{sub 6}Mn was made by two routes: by phase transition from metastable Mn dispersoids which already existed, and from the supersaturated solid solution by homogeneous nucleation. The density of the Al{sub 6}Mn phase increased with the addition of manganese, while the shape and average size remained unchanged. A significant increase in the hardness was observed to coincide with the formation of the Al{sub 6}Mn phase. Similarly, the tensile strength increased further after the aging treatment, and the increment was constant over the content of Mn in the alloy, which was explained by the contribution from the same amount of precipitates, MgZn{sub 2}. Results of thermal analysis indicated that the dissolution of the T phase started near 180 C and that formation of Al{sub 6}Mn occurred at about 400 C, suggesting that further enhancement of strength is possible with the modification of the heat-treatment schedule.

• Sponsoring Organization: USDOE
• OSTI ID: 634562
• Journal Information: Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science, Journal Name: Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science Journal Issue: 7 Vol. 29; ISSN 1073-5623; ISSN MMTAEB
• Country of Publication: United States
• Language: English

Related Subjects

36 MATERIALS SCIENCE
ALUMINIUM ALLOYS
CHEMICAL COMPOSITION
HARDNESS
HEAT TREATMENTS
MAGNESIUM ALLOYS
MANGANESE ADDITIONS
MICROSTRUCTURE
TENSILE PROPERTIES
ZINC ALLOYS
ZIRCONIUM ADDITIONS