Pretest analysis document for Test S-NH-2
This report documents the pretest analysis calculation completed with the RELAP5/MOD2/CY3601 code for Semiscale MOD-2C Test S-NH-2. The test will simulate the transient that results from the shear in a small diameter penetration of a cold leg, equivalent to 2.1% of the cold leg flow area. The high pressure injection system is assumed to be inoperative throughout the transient. The recovery procedure consists of latching open both steam generator atmospheric dump valves, supplying both steam generators with auxiliary feedwater system is assumed to be partially inoperative so the auxiliary feedwater flow is degraded. Recovery will be initiated upon a peak cladding temperature of 811/sup 0/K (1000/sup 0/F). The test will be terminated when primary pressure has been reduced to the low pressure injection system setpoint of 1.38 MPa (200 psia). The calculated results indicate that the test objectives can be achieved and the proposed test scenario poses no threat to personnel or to plant integrity. 7 refs., 16 figs., 2 tabs.
- Research Organization:
- EG and G Idaho, Inc., Idaho Falls (USA)
- DOE Contract Number:
- AC07-76ID01570
- OSTI ID:
- 6330845
- Report Number(s):
- EGG-RTH-7101; ON: TI86004125
- Country of Publication:
- United States
- Language:
- English
Similar Records
Analysis of semiscale test S-LH-2 using RELAP5/MOD2
Analysis of semiscale test S-LH-2 using RELAP5/MOD2
Related Subjects
21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS
LOSS OF COOLANT
HEAT TRANSFER
HYDRAULICS
PRIMARY COOLANT CIRCUITS
PWR TYPE REACTORS
BENCHMARKS
COMPUTERIZED SIMULATION
REACTOR SAFETY
ACCIDENTS
COOLING SYSTEMS
ENERGY SYSTEMS
ENERGY TRANSFER
FLUID MECHANICS
MECHANICS
REACTOR ACCIDENTS
REACTOR COMPONENTS
REACTOR COOLING SYSTEMS
REACTORS
SAFETY
SIMULATION
WATER COOLED REACTORS
WATER MODERATED REACTORS
220900* - Nuclear Reactor Technology- Reactor Safety
210200 - Power Reactors
Nonbreeding
Light-Water Moderated
Nonboiling Water Cooled